UV Sterilisation Lamp

1. Connect Power with Plug: Press the power button

2. . Long Press Power Key for 5 sec, then will have 2 Buzzers remind for confirmation.

A: After 2 Buzzers remind, you should select 15' / 30' /60' as you need in 5 s, then will have gradual Buzzers around 15 s, during 15 s people or Pet need go away, then light start to work, After Timing finished, light will have a Buzzer for remind, then stop work. 

B: After 2 Buzzers remind, If you do not select 15' / 30' /60' in 5 s, light start to work 60 min automatic. After 60 min finished, light will have a Buzzer for remind, then stop work automatically.

1. When people or Pet close sterilization light (in 7 m), the light will stop work automatically. 

2. When people or pet leave, after 10 s, the light restart work automatically until the end of the adjusted work time.

Before irradiation After irradiation

Do not look directly at the UVC lamp! The UVC-ray can result serious damage including eye and skin irritation!

Be sure that people, pets and plants will keep away from the room during the sterilization time! 

The most effective sterilizing distance is 1 meter from the lamp, so as close you place the lamp to the surface the best sterlizing result you will get.

For efficient desinfection we recommend to clean the room before using the UVC lamp. If the room temperature is below 20 ° C or over 40 ° C we recomend to enlarge the sterliziation time with 15 minutes. 

We recommend to clean the UV tube before sterilization. Oil, water and dust can reduce the sterilization effect of the lamp

Please remove any art pieces (prints, paintings, calligraphy, etc.) or cover them before using the UV lamp.

WARNING! 

When you use the UV sterilizer lamp keep people, animals and plants away to avoid injury from ultraviolet radiation! Take care of all security and safety instructions of this user manual.