Hi-Tech, microprocessor based correctors with LCD display. They are suitable for setting 7 or 12 capacitor groups. These correctors are metering the parameters in one phase and the interference happens accordingly.
The value and the style of power ratio, the phase current and voltage, the voltage harmonics, the capacitor’s temperature and the number of switched capacitor groups are displayable. On manual state the user can control the number of capacitor groups. During testing process the connected levels and the level’s reactive power ratio is defined automatically. In automatic mode, the switching of capacitor groups takes place according to needed capacitor power and pre-adjusted parameters.
During rating process the switching of the levels follows a complex algorithm according to adjusted power factor value and level, protecting the capacitor groups and the switching contactors from run-down. The device has a potential free alarm output and it is programmable with front panel pushbuttons. The cooling is getting active according to pre-adjusted and memory stored level when the capacitor’s temperature is rising up. The alarm output’s active state is displayed by front panel LED.

Main functions
• adjustable power ratio (cos ϕ) between 0,8 ind. – 1,0 cap;
• automatic and manual mode functions;
• exact initial capacitor power calculation;
• automatic current limit adjustment (C/k value);
• automatic polarity recognition on the CT terminals (k-l);
• adjustable overvoltage-overheat protection limit;
• alarm in case of over or under compensation;
• adjustable voltage-harmonics and overload protection limit;
• adjustable capacitor on and off switching time;
• power factor, phase voltage and current, frequency, temperature, voltage harmonics range metering, control, display;
• the art of failure and the switched number of levels also can be displayed.